There’s a difference between believing something can happen and watching it happen right in front of you. That’s the difference the Cepaka Learning Center team felt on Day Three of the visit to Get Plastic. After two days spent understanding the machine and practicing how to run it, day three became the proof: plastic waste that used to be nothing more than a pile of trash now came out of the machine as gasoline and diesel, ready to use.
The photos from the day capture it clearly: jerry cans filled with clear and yellowish liquid, each labeled “This gasoline comes from plastic waste” and “This diesel comes from plastic waste.” Those simple words carry a bigger message. Everything learned over three days wasn’t just theory. The result could be held, poured, and even used.
From Reactor to Jerry Can: Watching the Final Output of Pyrolysis
The most tense and satisfying part of a pyrolysis process usually isn’t when the machine starts, but when the final output finally comes out. Day three captured exactly that. Staff were seen filtering and pouring the liquid from the collection tank into different jerry cans, separating gasoline from diesel based on their distinct properties.
That filtering process itself became a new skill for Cepaka Learning Center staff to pick up. Not every liquid that comes out of a pyrolysis reactor carries the same quality. There’s a separation and filtering stage that decides whether the final output actually qualifies as gasoline or diesel, or still needs to go through the process again.
Before reaching the filtering stage, there’s a step just as important: monitoring the machine’s control panel. The documentation shows staff checking the indicator panel directly, making sure temperature and pressure sat at the right numbers before the pyrolysis process could be considered complete.
Reading a control panel is a technical skill that doesn’t come from verbal explanation alone. Staff need to know when the numbers on the panel signal normal operation, and when something needs a closer look. That kind of knowledge only forms through hands-on experience, not from reading a manual.
Putting It to the Test: Plastic-Waste Gasoline Poured Into a Motorbike
The part that drew the most attention on day three was something as simple as filling a motorbike’s tank. The photos show gasoline processed from plastic waste poured straight into a motorbike, real proof that this fuel could actually be used, not just sit as liquid inside a jerry can.
A test like this matters psychologically as much as technically. Watching liquid made from waste actually start a motorbike engine builds far more confidence than any data sheet listing octane content or fuel efficiency. For staff watching it happen, this became proof that three days of learning at Get Plastic really did lead to something real.
Read also: Day Two Visit to Get Plastic: Running the Machine
Posing With the Result: A Pride Worth Celebrating
One photo shows staff posing while holding jerry cans labeled “This gasoline comes from plastic waste” and “This diesel comes from plastic waste.” A photo like this might look simple, but it carries real weight.
After three days wrestling with machine components, dirty plastic waste, and a process that didn’t always run smoothly, it makes sense that staff wanted to capture the moment their work finally paid off. That sense of pride matters for the program’s long-term success too. Staff who go home feeling ownership over their work tend to be more motivated to apply what they learned back at Cepaka Learning Center, compared to simply following instructions without ever feeling the process firsthand.
Three Days That Formed One Complete Learning Arc
Looking back, the three-day visit to Get Plastic followed a structure that built on itself at every stage. Day one laid the groundwork in machine anatomy and waste sorting. Day two turned that groundwork into hands-on skill through practice operating valves and loading the reactor. Day three closed everything out with tangible proof: plastic waste that genuinely turned into fuel, filtered, packaged, and put to the test.
A staged learning approach like this sets a good example for a social foundation in Bali aiming to build its team’s capacity all the way through, not just on the surface. Staff coming home from this three-day visit don’t just understand how pyrolysis works, they’ve witnessed and felt the entire process themselves, from dirty waste to fuel that can start an engine.
What It Means for Cepaka Learning Center and CSR in Bali
The impact of this three-day visit will eventually show up at Cepaka Learning Center itself. Staff who’ve seen firsthand how Get Plastic turns waste into ready-to-use fuel now have a much clearer picture of what’s achievable through their own pyrolysis-based community empowerment work in Cepaka Village.
For any company or partner weighing a CSR program in Bali, this three-day story also offers concrete proof of what investment in technical training can produce. Not just a report on paper, but visual evidence: jerry cans of gasoline and diesel that genuinely came from plastic waste once considered worthless.
Closing Thoughts: When Waste Truly Becomes a Solution
Day three of the visit to Get Plastic closed out the three-day learning arc in the most convincing way possible, by showing the result directly. Gasoline and diesel neatly filtered into jerry cans, then tested on a motorbike that actually started, stand as proof that what Cepaka Learning Center staff learned wasn’t just a concept on paper.
The three-day visit has ended, but the story really begins once this knowledge gets carried home and put into practice at Cepaka Learning Center. And maybe that’s the biggest takeaway from the whole visit: waste long treated as a problem can actually become a solution, as long as someone stays patient enough to learn the process all the way through.
